LM 369 Contact-Grease

DESCRIPTION LM 369 Contact Grease is a gel-thickened, silicone-free synthetic grease which has been formulated for universal use. It is particularly suitable for fine mechanical lubrication points. For lubrication and care of electrical contacts and guideways.-

PROPERTIES - high resistance to ageing
- the synthetic base oil has excellent viscosity/temperature properties
- very good low and high temperature properties
- protection against corrosion and oxidation

TECHNICAL
DATA Colour : yellow
Basis : synthetic oil
Consistency modifiers : inorganic thickeners
Density at 20 °C : 0.9 g/cm3 DIN 51 757
Flow pressure at -35 °C : 450 hPa DIN 51 805
Drop point : non-drip DIN ISO 2176
NLGI number : 1 - 2 DIN ISO 2137
Operating temperature range: -45 °C to +150 °C
Oil separation, 10d/40 °C : max. 3 wt % DIN 51 817
Water resistance : 0 - 1 DIN 51 807
Working resistance after
60,000 double strokes : max. +30 1/10 mm DIN ISO 2137
Copper corrosion : 0 DIN 51 811
Specific electrical
resistance : 3.1 · 107 Ohm · cm

APPLICATION Contact grease for universal use with wide operating temperature range under high loading.

INSTRUCTIONS Before treating with LM 369 Contact Grease, the contact surfaces must be clean and free from residues such as lubricants, dirt and moisture. Apply the product as a thin, uniform layer.

Before using the product, check for compatibility plastics at risk from stress-cracking.

AVAILABLE
PACK SIZE LM 369 Contact Grease 500 g can Part no. 3176